How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., Technician
Category: Small Engine
Satisfied Customers: 14618
Experience:  Certified on Onan and Generac generators
19372534
Type Your Small Engine Question Here...
Hank F. is online now
A new question is answered every 9 seconds

Trying to replace brush holder on px12000e keep breaking

Customer Question

Hello Trying to replace brush holder on px12000e keep breaking bruches ? any trick to replacement
Submitted: 1 year ago.
Category: Small Engine
Expert:  Hank F. replied 1 year ago.

Hello, thanks for requesting me.

I am not sure how you are breaking brushes, you really didn't say.

But there is no trick t changing them. Thebrush block has 2 screws holding it in place. Simply remove both screws, pull the brush block straight out, slide the new bruh block in, and install the screws.

Expert:  Hank F. replied 1 year ago.

Was this what you wanted to know?