How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donald Your Own Question
Donald
Donald, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1799
Experience:  I have 25+ years of experience repairing 2 & 4 cycle engines
72377906
Type Your Small Engine Question Here...
Donald is online now
A new question is answered every 9 seconds

My &S model 030325, will not start. My guesss is that gas

Customer Question

My B&S model 030325, will not start. My guesss is that gas remained in carborator since last use, and gelled, or sticking the floats orlins inside the carb. It will fire up when i spray cleaner down the choke, but stops after burning it. Fuel is getting to the carb, but not igniting. How cani clean this gunk out? Or do i have it serviced by a tech.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Donald replied 1 year ago.

Hello. My name is***** will be happy to assist you. Your carburetor very likely have clogged jets, and fuel passages, due to stale gas that remained in your carburetor, since your last use.

Expert:  Donald replied 1 year ago.

You will need to dis-assemble your carburetor, and soak it really well prior to cleaning it.

Expert:  Donald replied 1 year ago.

It is always best to put in a new carburetor repair kit, after you are finished cleaning your carburetor.

Expert:  Donald replied 1 year ago.

Sometimes carburetors can be difficult to properly clean.