How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26511
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I am replacing the hydr. Lines frount end loader kubota

Customer Question

I am replacing the hydr. Lines for a frount end loader kubota 245dt...and not sure I have remembered the correct configuration.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Control valve has two spools , one for boom, one for bucket. You have two hoses for boom, two for bucket. Both hose for the function go on the same spool section.

Expert:  Curtis B. replied 1 year ago.

Then work the function, if function is reversed, swap the two hoses.