How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26053
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Went to pull the lever to encage the blades and there is no

Customer Question

Went to pull the lever to encage the blades and there is no tension on the handle
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Handle engages cable to the deck. Cable is broken or loose at either end.

Customer: replied 1 year ago.
When you try and move the handle there is no tension, the is connected on both sides, the is not connected to the spring how's that connect?
Expert:  Curtis B. replied 1 year ago.

Page 24 in owners manual.

Expert:  Curtis B. replied 1 year ago.

http://www.shopyourway.com/manuals/21364

Customer: replied 1 year ago.
It's not the belt system it's the handle up by the steering wheel that is not connected
Expert:  Curtis B. replied 1 year ago.

http://s.sears.com/is/image/Sears/PD_0057_562_199972?wid=400&hei=400

Expert:  Curtis B. replied 1 year ago.

http://c.searspartsdirect.com/lis_png/PLDM/P0901012-00010.png