How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1049
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

My hydro pedal on my LT 1045 is broken and goes to the floor

Customer Question

My hydro pedal on my LT 1045 is broken and goes to the floor when I press forward and it does not go forward, but backwards is ok. What's broken?
Submitted: 1 year ago.
Category: Small Engine
Customer: replied 1 year ago.
I hope it's not the transmission...........maybe a spring?
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

Can you tell me how old your machine is? Can you provide the model and serial number from the frame so that I can better assist you?

Customer: replied 1 year ago.
Hi
It is a cub cadet Lt 1045. 7 years old. Can't find serial number.
Expert:  JohnF2015 replied 1 year ago.

The first thing that I would look at on your machine would be the control rod or linkage that goes between the foot pedal and the transmission. I would look at back where it attaches to the transmission to make sure that it has not come loose. It could still push the drive control backwards but would not pull it forward when the pedal is operated. You haven't by chance had either one of the rear wheels off due to fixing or repairing a flat just prior the having this problem have you?