How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1079
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

Have a Toro Z16-44 zero turn that stalls when ether handle

Customer Question

Have a Toro Z16-44 zero turn that stalls when ether handle in moved, the break is mover or when the throttle is pushed up to "jack rabbit "position.? The mower will start and run. Model # *****
Submitted: 1 year ago.
Category: Small Engine
Customer: replied 1 year ago.
I don't want any other service. I don't want to be charged every month for something I most likely will not use. Id this is not acceptable., disreguard my question. I want to fix this problem and do not want to buy any future service.
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

You will not be charged monthly unless you sign up for a subscription.

So if I am reading the information correctly that you have provided. The machine dies when you release the brake lever or move either left or right control lever is this correct?

Expert:  JohnF2015 replied 1 year ago.

This sounds like the seat safety switch is not working properly. Is the seat safety switch still hooked up?