How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1020
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

How do u replace the trigger on a troy-bilt weadeater model

Customer Question

How do u replace the trigger on a troy-bilt weadeater model TB22EC 2014?
Submitted: 1 year ago.
Category: Small Engine
Customer: replied 1 year ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 1 year ago.
Just in case, my phone number is ***** and my email is***@******.***
Customer: replied 1 year ago.
I made this request 2 hours ago. Will I get an answer soon?
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is***** will be assisting you.

I apologize for the delays in someone getting back with you.

I hope that I can be of some help to you today.

Expert:  JohnF2015 replied 1 year ago.

In order to replace the throttle trigger you will need to disassemble the handle housing where the trigger is at. There are a total of six torx head screws that hold this handle together, sometimes the screws are also slotted so that you can use a small slotted screwdriver to remove them. Once you have removed the screws the handle will come apart off of the shaft. The trigger is slid onto a post of the right side handle housing, there is a spring there as well, make sure to not loose the spring as you will need to reuse it. Be aware of how the spring is inserted into the original trigger so that you can put it back into the new trigger the same way. Reassemble everything is reverse steps and you should be ready go to work again.

I have included a diagram of the handle and trigger that might help you while doing this repair.

If you need additional assistance feel free to ask.

Please take a moment to rate your experience.

Related Small Engine Questions