How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12892
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

The clutch has 3 bolt/springs with 6.6volts at clutch lead

Customer Question

the clutch has 3 bolt/springs with 6.6volts at clutch lead it will not engage. 15plus volts at switches. i can not verify delay relay is energized
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.

Welcome to JUST ANSWER small engines, let me try to help you !! Clutch has to have 12 volts to close it. The 6.6 volts is not enough. Trace the clutch wires back and find where the voltage is lost. The relay has to be closing, or you would have nothing. It may not be making a good connection, check voltage to it, and if it has 12 in, it should have 12 out. If not replace the relay.