How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1079
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

I HAVE A DAYTON 6000 WATT GENERATOR WITH A BROKEN COOLING

Customer Question

I HAVE A DAYTON 6000 WATT GENERATOR WITH A BROKEN COOLING FAN BLADE BETWEEN THE ENGINE AND THE GENERATOR HOW DO I REMOVE THE BROKEN PART
AND WHERE CAN I GET PARTS
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.

Hi, my name is ***** ***** I will be assisting you.

In order to replace the fan you will have to take the genset apart off of the rear of the engine. The stator assembly has to be removed and the rotor has to be removed from the crankshaft.

I have been able to located a part number for the fan which is 27003008. Unfortunately there seems to only be one place that you may find the part and that is All Parts Inc. you can call them at 1-***-***-**** or 1-***-***-****. I can't find any other source for the part and All Parts does not show the ability to order it online through their website.

Thank you, ***** ***** been a pleasure to assist you.

Please take a moment to rate your experience.