How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12726
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Engine will not stop running after starting ..bronco. Model

Customer Question

Engine will not stop running after starting ..bronco. Model # *****
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.
This sounds like you are not grounding the ignition coil when you turn the key off. Can you check the wiring going from the ignition switch down to the ignition coil to make sure that all wires are connected properly. Then I would remove the blower housing that covers the flywheel on top of the engine, unhook the small wire that is plugged onto the coil and check for continuity between the wire and the engine block with the key in the off position and the on or run position an see what you have.