How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12592
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a cushman 8010 mower the blade clutch was replaced but

Customer Question

i have a cushman 8010 mower the blade clutch was replaced but clutch wont disengage, any suggestions?
Submitted: 1 year ago.
Category: Small Engine
Customer: replied 1 year ago.
it is a Cushman mower.
Customer: replied 1 year ago.
9010 mower
Expert:  JohnF2015 replied 1 year ago.
It sounds like it is getting constant voltage to the clutch. I would check the wiring to make sure that the wires coming over to the clutch haven't melted together which would cause the problem, the only other thing that might cause it is a bad pto switch that is not breaking contact when it is turned off.Let me know what you find.