How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donald Your Own Question
Donald
Donald, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1799
Experience:  I have 25+ years of experience repairing 2 & 4 cycle engines
72377906
Type Your Small Engine Question Here...
Donald is online now
A new question is answered every 9 seconds

Looking wit Husqvarna LGT2554 that won't move. I

Customer Question

Looking for help wit Husqvarna LGT2554 that won't move. I replaced drive belt but the tranaxle won't engage
Submitted: 1 year ago.
Category: Small Engine
Expert:  Donald replied 1 year ago.
Hello and thank you for choosing Just Answer. My name is ***** ***** I will do my very best to get you the answer you need to your question.
Did you route your new belt, around each pulley correctly? Is your new belt, an OEM Belt? Is your belt tight?
Expert:  Donald replied 1 year ago.
Your belt is very likely going to be at fault.