How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12773
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

LX277 WITH 42 C DECK. VERY UNEVEN CUT. ONE BLADE HEIGHT IS

Customer Question

LX277 WITH 42 C DECK.
VERY UNEVEN CUT.
ONE BLADE HEIGHT IS 3/8' HIGHER THAN THE OTHER.
NEITHER BLADE IS BENT.
NO VISIBLE DAMAGE TO DECK
ARE THE SPINDLES DIFFERENT LENGTHS & MAY HAVE BEEN
SWAPPED WHEN BEARING WERE REPLACED?
ANY IDEAS?
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.
The two spindles are identical on this machine. You have checked about everything that I can think of.When measuring the blade height, what are you measuring to? From the floor to the mower deck edge? From the floor to the blade tip?