How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12822
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Speed selector on RM1330 will only go to 1st. Have oiled the

Customer Question

speed selector on RM1330 will only go to 1st. Have oiled the shaft on which the device that moves the disc slides. will the shaft have to be replaced or can it be polished.
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.
It looks like based on the parts breakdowns that you could take that assembly apart and polish the shaft which should take care of your problem. I would guess that the shaft either has rust build up on it or a lot of grime on it which is causing it to not shift freely.