How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donald Your Own Question
Donald
Donald, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1800
Experience:  I have 25+ years of experience repairing 2 & 4 cycle engines
72377906
Type Your Small Engine Question Here...
Donald is online now
A new question is answered every 9 seconds

Place freewheel control in “engaged” position, was mowing,

Customer Question

Place freewheel control in “engaged” position, was mowing, then while backing up tractor just stopped, no forward or backward. found rod I think is freewheel but what to do?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Vince O. replied 1 year ago.
Hello, what is the model number from under the seat? Did you back up into something? (bushes or fence)
Customer: replied 1 year ago.
in to brush pile, pulled stick from left side under and toward front of seat
Customer: replied 1 year ago.
(###) ###-####
Expert:  Vince O. replied 1 year ago.
I am unable to find a good clear picture or any info that would be useful to you. I think it would be a good idea for me to opt out and let another try too help you I wish you luck.
Expert:  Donald replied 1 year ago.
Hello and thank you for choosing Just Answer. My name is ***** ***** I will do my very best to get you the answer you need to your question.
Check your transmission drive belt. It has likely slipped off of one of your pulleys, or has broken. Your mower has two belts. One drives your transmission, and the other drives your deck.