How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1079
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

Just replaced a dead battery on my SS4260 w/Kawasaki eng.

Customer Question

Just replaced a dead battery on my SS4260 w/Kawasaki eng. Electric brake will not disengage and engine keeps running after turning ignition switch Off? Any help[?
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.
I have run into this problem before on a machine like this. It ended up being in the electronic brake controller, the pins in the brake controller had corroded and broken off, this was causing the brake to not disengage and the machine would not start due to poor connection at the electric brake controller. I would suggest taking a good look at the brake controller and the electrical connections going to it. Thanks