How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JohnF2015 Your Own Question
JohnF2015
JohnF2015, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1019
Experience:  Owner/Service Technician at S & J Small Engines
87465640
Type Your Small Engine Question Here...
JohnF2015 is online now
A new question is answered every 9 seconds

I have a 2008 timecutter 4200 with a kohler courage 19hp. I

Customer Question

I have a 2008 timecutter 4200 with a kohler courage 19hp. I have a 23hp kohler command on a Deere L130. Can I install the 23 on the toro
Submitted: 1 year ago.
Category: Small Engine
Expert:  JohnF2015 replied 1 year ago.
You should be able to. The only thing that I can think of that might keep you from doing so is the crankshaft pto diameter. The machine should have plenty of room to handle to engine without any problem. The wiring should be the same, the exhaust may be different but you can probably reuse the exhaust from the Deere with some modification. I don't see anything that would keep you from swapping them. PTO crankshaft diameter is the only stop point that I can think of. Thanks

Related Small Engine Questions