How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Vince O. Your Own Question
Vince O.
Vince O., Small Engine Technician
Category: Small Engine
Satisfied Customers: 2767
Experience:  Over 30 years experience repairing lawn and garden equipment. Chainsaws, mowers,blowers and trimmers
32407143
Type Your Small Engine Question Here...
Vince O. is online now
A new question is answered every 9 seconds

I need to replace a Husqvarna 128L Ignition Coil. Is there

Customer Question

I need to replace a Husqvarna 128L Ignition Coil. Is there anything holding the shroud on after the screws are removed?? I have reied to open it but it seems like something is holding it.
Submitted: 1 year ago.
Category: Small Engine
Expert:  Vince O. replied 1 year ago.
Hello, have you removed the starter, the muffler cover and black piece under the cover? After those are removed there are 4 screws holding front and rear covers together
Expert:  Vince O. replied 1 year ago.
You basically remove the engine
Customer: replied 1 year ago.
OK thanks Vince i'll do that.
Expert:  Vince O. replied 1 year ago.
You're welcome.

Related Small Engine Questions