How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 27756
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Yazoo Kees Zero turn ZVKW52253 2010 won't start. I installed

Customer Question

Yazoo Kees Zero turn ZVKW52253 2010 won't start. I installed new battery and starter doesn't even click, by passed starter and it spins but bendex won't engage. removed starter and bench tested it, starter spins and bendex engages. re installed and still have the same problem. checked fuses and they are fine. Have parking brake on to engage safety switch and mover deck off ( safety switch) and sat on seat (safety switch engaged)
How do I test the switches, including ignition ? or am I missing something here?
Submitted: 2 years ago.
Category: Small Engine
Expert:  Curtis B. replied 2 years ago.
Welcome to JUST ANSWER small engines, let me try to help you !! Do you have the parts manual showing the wiring diagram and the switch positions? Page 36 and 37 show the diagrams. ================================================================================================================================================================================http://www.klippo.com/ddoc/YAZI/YAZI2006_USen/YAZI2006_USen__539112688R01.pdf
Customer: replied 2 years ago.
YES I HAVE THE WIRING DIAGRAM
Expert:  Curtis B. replied 2 years ago.
OK, with test light or voltmeter, do you have voltage in the wire from keyswitch, that should go to the solenoid when you turn the key to start? If you do, trace wire, or replace the wire. Check the wiring diagram switch positions to see which is not making the connection.