How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13160
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Have a Poulan PP502oav chain saw>. Having difficulty removing

Customer Question

Have a Poulan PP502oav chain saw>. Having difficulty removing the side cover.
Have managed to remove the nuts from the bar bolts and the lower left side of the
cover. Cannot remove the top left side in order to take of the side cover to install
the bar and chain.
The instruction manual is not t he same as this model but rather PP4620AVX
THIS UNIT WAS BOUGHT WITH THR CHAIN NOT INSTALLED
Submitted: 1 year ago.
Category: Small Engine
Expert:  Vince O. replied 1 year ago.
Hello,put the nuts back on and line up the chain adjuster with the hole in the bar.Then try disengaging the chain brake to remove the side cover.
Expert:  Vince O. replied 1 year ago.
Snug the two nuts first before squeezing the brake handle.