How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12592
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a DM 950G Daihatsu, no spark. Changed out the ignition

Customer Question

I have a DM 950G Daihatsu, no spark. Changed out the ignition module. Still no spark. Can you tell me the resistance value of the Pulser (Hall Effect) cam sensor?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.
Welcome to JUST ANSWER small engines, let me try to help you !!The trigger as it is called in the service manual link I have, shows this as the test! Gives no other values. !! 113 ELECTRICAL SYSTEMTEST EQUIPMENTThe digital multimeter, Tool #19390 is required to test the ignition components, Fig. 2.NOTE:All ignition tests are performed with engineNOT running.Fig. 2 – Digital MultimeterTESTING TRIGGERThe following test will be made with the meter in the“Diode Test Position” .1. Attach a meter test lead to each trigger terminal inconnector, Fig. 3.a. Meter should “Beep” once.b. If meter makes a continuous tone or displaysOL, trigger is defective. Replace trigger.2. Reverse test leads.a. Meter should “Beep” once.b. If meter makes a continuous tone or displaysOL, trigger is defective. Replace trigger