How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13160
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a gt235 john deere....blades will not engage. Replaced

Customer Question

I have a gt235 john deere....blades will not engage. Replaced needed battery. Pto switch and fuses worked once then not again
Submitted: 2 years ago.
Category: Small Engine
Expert:  Curtis B. replied 2 years ago.
Welcome to JUST ANSWER small engines, let me try to help you !! Can you take two jumper wires direct from the battery to the electric clutch , to see if it will engage the magnet in the clutch? Just with engine off and key off, you don't need anything but the jumper wires from battery to the electric clutch. If clutch is good, then need to check the switch for voltage output. And if the charging system is keeping the voltage up.