How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26033
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Husqvarna 562xp chain saw wont start after refueling and now

Customer Question

Husqvarna 562xp chain saw wont start after refueling and now wont start at all
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.
Welcome to JUST ANSWER small engines, let me try to help you !! Will it start for a few seconds, if you put fuel direct into the spark plug hole? Are you using mixed fuel or a premix? Is fuel correct?
Customer: replied 1 year ago.
using mixed fuel and mix is correct it wont fire at all. I don't have 5 tanks through it yet
Expert:  Curtis B. replied 1 year ago.
Did you try it with fuel direct into the cylinder?
Customer: replied 1 year ago.
no I haven't I will tomorrow it is at my shop
Expert:  Curtis B. replied 1 year ago.
OK, let me know. If it does not fire, I would think about warranty, do you have warranty on it? Anything else will require going into the carburetor and checking the cylinder.
Customer: replied 1 year ago.
this morning the saw fired right up. cracked fuel line?
Expert:  Curtis B. replied 1 year ago.
!! hard to say. If fuel line was cracked or loose on the carburetor it could cause no start.