How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Briggs-Fan Your Own Question
Briggs-Fan
Briggs-Fan, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1199
Experience:  over 15 years experience in small engine repair, multiple certifications
75998144
Type Your Small Engine Question Here...
Briggs-Fan is online now
A new question is answered every 9 seconds

JR - Have a John D LT150 that I just had serviced, blades sharpened,

Customer Question

JR - Have a John D LT150 that I just had serviced, blades sharpened, oil change, etc - yearly maintance. When returned is not cutting a 3" strip in middle. Has never doen this before. Any suggestions?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Briggs-Fan replied 1 year ago.
Hi my name is ***** ***** welcome to just answer, did they replace the blades ? If so it sounds like one is to short , the only way to tell is raise the deck up with the mower off and turn all the blades by hand to line them up and make sure they are all only 1/8 " from touching