How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Donald Your Own Question
Donald
Donald, Small Engine Technician
Category: Small Engine
Satisfied Customers: 1799
Experience:  I have 25+ years of experience repairing 2 & 4 cycle engines
72377906
Type Your Small Engine Question Here...
Donald is online now
A new question is answered every 9 seconds

Honda gx 390 engine. Need to replace pull starter flange cup.

Customer Question

Honda gx 390 engine. Need to replace pull starter flange cup. Is nut clockwise to unscrew? and how do you stop engine drive from turning? Thanks
Submitted: 1 year ago.
Category: Small Engine
Expert:  Donald replied 1 year ago.
Hello and thank you for choosing Just Answer. My name is ***** ***** I will do my very best to get you the answer you need to your question.
You can remove one of your spark plugs, and fill your cylinder with some soft rope, through your spark plug hole. The type rope used in lawnmowers, and trimmers works really well for this purpose. The rope will safely block your piston, as it rises to the top of your cylinder, preventing rotation of your flywheel, as you loosen your nut.
Loosen your flywheel nut counterclockwise. We can continue from here. Thanks!