How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 27464
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Have a generac 2700psi washer. problem is fuel is leaking from

Customer Question

Have a generac 2700psi washer. problem is fuel is leaking from carburetor when I open fuel valve. thoughts?
Submitted: 2 years ago.
Category: Small Engine
Expert:  Curtis B. replied 2 years ago.
Welcome to JUST ANSWER small engines, let me try to help you !! If leak is not at the incoming fuel line, you have a stuck needle valve or float in the carburetor. Remove the float bowl and look for debris and if the float and needle valve is clean and free to move. Here is basic carburetor link . Left click to highlite the link, right click to access.--------------------------------------------------------------------------------------------------------------------------------http://outdoorpowerinfo.com/repairs/briggs_walbro_lmt_carb.asp
Customer: replied 2 years ago.
I don't see a link
Customer: replied 2 years ago.
The needle was stuck. It's fixed now. Thank you.
Expert:  Curtis B. replied 2 years ago.
Good job! Please rate and accept to close the question. Thank you.