How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 26015
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 25hp kawaskie enginge rthe camshaft was replace and

Customer Question

I have a 25hp kawaskie enginge rthe camshaft was replace and waterpump but dont remember how to set timing marks to start it on compression stroke nor do I know where no 1 plug is can you help
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.
Crankshaft and camshaft gears have two mating marks. Just put the two marks together. You do not have to find TDC, and many engines do not line up at TDC. That is all that is necessary inside the engine. The other timing is the crankshaft to flywheel key. That is all the timing there is.