How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Engine Rebuilder
Category: Small Engine
Satisfied Customers: 8601
Experience:  many years on egine rebuilding, lawn mower,roto tiller,Truck,and small engines
6825259
Type Your Small Engine Question Here...
Wayne is online now
A new question is answered every 9 seconds

How to change float needle and seat on Honda hrt216ktda mower

Customer Question

How to change float needle and seat on Honda hrt216ktda mower motto MZCG-6639531 serial number
Submitted: 1 year ago.
Category: Small Engine
Expert:  Wayne replied 1 year ago.
Hi I'm Wayne I will help you with this unscrew the bottom bolt of the fuel bowlthe bowl will drop down, then you will see a pin 1/8" thru the float and carb , remove that , needle valve will come out, then unscrew the seat , Brass fitting If this helped you, Please rate my answerIf Not, Please USE REPLY BUTTON FOR MORE INFO
Customer: replied 1 year ago.
I did that, why would it start leaking gas when the bowl fills with gas?
Expert:  Wayne replied 1 year ago.
HI Thank you for thatgasket is pinched,bowl off centerspring clip is in the bowl seal, if equipped
Expert:  Wayne replied 1 year ago.
Hi
I'm just following up with you
did my answer help you
Wayne