How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12892
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Bolens ht20 model 2087 tractor with a kohler 532s

Customer Question

I have a Bolens ht20 model 2087 tractor with a kohler 532s engine. surging so i cleaned the carb, now adjusting the governor spring have the one side of the spring out, trying to go down 1 hole on the arm and can't get the spring back in the hole. afraid of breaking the en d off the spring. what can i do?
Submitted: 1 year ago.
Category: Small Engine
Expert:  Curtis B. replied 1 year ago.
http://www.kohlerengines.com/onlinecatalog/pdf/en_607.pdf
Expert:  Curtis B. replied 1 year ago.
Are you using needle nose pliers? The spring is not going to break!
Expert:  Curtis B. replied 1 year ago.
Are you using needle nose pliers? The spring is not going to break!
Expert:  Curtis B. replied 1 year ago.
You have service manual? page 5.2 see link above