How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 25652
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have replaced my pulsor coil ignator and ing coil the engine

This answer was rated:

I have replaced my pulsor coil ignator and ing coil the engine still does not
fire,it started to fire but stopped.what do I need to check next.Its a 1987
ezgo with 2 stroke.

Curtis B. :

Welcome to JUST ANSWER small engines, let me try to help you !!

Curtis B. :

Locate the black wire on the igniter and unplug it. This should be the kill wire. Then check for spark. If you have spark, the kill wire or ignition circuit is shorting out the spark,. Here is link to a wiring diagram, it is on the bottom of the opening page, you will need to scroll all the way to the bottom of the page.

Curtis B. and other Small Engine Specialists are ready to help you

Related Small Engine Questions