Mower has new plug/oil/filter/gas....but...will only run off of the primer gas,,,,,have drained the new gas, removed the rubber fuel line from tank to carb...used carb cleaner and air pressure to sort clean the carb...still only will run off the primer gas.....that only happens with the start lever in the start position....now what do i do?????Melvyn
Have changed the plug/oil/filter/gas...will only
run off of the primer gas..drained the new gas
removed the rubber fuel line from tank to carb..
it was not stopped up..used some carb. cleaner
on the carb....even shot some air into it...
re-connected all and it still only runs on the
primer gas....what now???
Hello how are you
What make and model engine is on your mower?
It is a briggs-stratton----not sure on the model....
Ok give me a moment to post some info for you
On the bottom of the carb bowl is a bolt that holds it on, this bolt is also the carbs main jet, the fuel that feeds fuel to the engine travles through this jet. Remove it and ensure the passageways inside are clear. Here is a picture of the jet
If you have any further questions let me know. Please remember to rate my answer ok service or better so i can be compensated for my time...Thanks
Thank you...for the quick suggestion...will try this evening....
My bet is you will find debris clogging that jet. Good luck
20 years of servicing small engines of all kinds