i have a one year old law mover, from sears model 675,model 917 370 660 ser num; 0312 11m 00 9788 the belt popped off the drive i cant seem to rewrap around pully due to belt guard any help !!(thats lawn mower)
Model: 917 370 660
cant get drive belt round pulley
Hello and welcome to Just Answer,
If the belt guide you are referring to is the one that is at the front of the mower above the transmission then you will need to remove the guide by removing the 2 bolts that hold it on. If the bolts are not accessible due to the pulley being in the way then remove the nut from the top of the pulley and slide the pulley off of the shaft. Put the belt on the pulley and then slide the pulley and belt back down on the shaft.