I have a BS 8HP tiller engine with a clutch starter rewind. The new alternate park requires removing the clutch housing and installing a cup and cutting the shaft off to the threads. Is the clutch housing threades and will remove by turning counter-clockwise? Model XXXXXXXXXX 01.
Make: Briggs Stratton
Model: XXXXXXXXXX 01
I have received part number 693900
Hello,it is standard thread and unscrews ccw.The clutch center will usually just spin and you have to remove by turning the round housing part.Not everyone has a special tool to remove it but you can use a screwdriver and hammer to remove it.Put the screwdriver or punch on one of the little ears the screen is screwed on with and tap it to loosen the starter clutch
Over 30 years experience repairing lawn and garden equipment. Chainsaws, mowers,blowers and trimmers