Generac GP15000E , new, has been sitting a few months.Cranks, is getting fuel, no spark.Checked fuse, good.Bypassed oil shut down switch, still no spark.Anything else common to check??Thank You,
XXX@XXXXXX.XXX1-XXX-XXX-XXXXR&R Truck and Trailer, Inc.
Checked fuse, good.
Bypassed oil shutdown switch, no change.
Cranks good, is getting fuel to combustion chambers.
No spark from plug wires.
Plugs check good also.
Hello!Thank you for choosing Just Answer for the solution to your problem.My name is XXXX, XXX I am going to assist you with this.What are the model and serial numbers of the genset?.
OKWhat you need to do now is to remove the flywheel cover, to get at the magnetos.Disconnect the small wire from both magnetos, and check for spark again.Do you have spark now?Check both cylinders..
Have you been able to do these checks yet?