Recent Feedback
I have a 10k Gen (Isuzu) in my motorcoach. I changed the fuel filter and now it wont start. The proceedure in the manual isnt working. Any suggestions?
Optional Information: Make: Onan Model: 10000kw Isuzu Already Tried: Start button proceedure 20+ times.
Hello!Thank you for choosing Just Answer for the solution to your problem.My name is XXXXX XXXXX X am going to assist you with this.What is the full model number of the genset?.
Onan HDCAA 10K Isuzu engine
There are 3 different versions of the HDCA - the full model number would be nice.But as a general rule, if simply holding the PRIME button for 1 minute does not get it going, get underneath the set and remove the fuel return line from the nipple on the set.Attach a length of hose to the nipple, and drop the hose in an empty container, like a soda bottle.Press and hold PRIME, and make sure fuel is flowing.If fuel is coming out the return line, the system has fuel in it.Next, run the preheat 3 or 4 times before cranking the engine, and see if that helps.If none of that works, the next step would be to crack open an injector line, and crank the set until fuel flows out.Then the set should start.
Experience: Certified on Onan and Generac generators