How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask J.R. Your Own Question
J.R.
J.R., Small Engine Technician
Category: Small Engine
Satisfied Customers: 7445
Experience:  Owner of outdoor power equipment business, repairing all makes and models.
13636126
Type Your Small Engine Question Here...
J.R. is online now
A new question is answered every 9 seconds

I am looking for the firing order of my wisconsin W4-1770

Resolved Question:

I am looking for the firing order of my wisconsin W4-1770 engine.
Submitted: 5 years ago.
Category: Small Engine
Expert:  J.R. replied 5 years ago.

Hello and welcome to Just Answer,

 

The firing order for that engine is 1-3-4-2. See attached link andd click on download and wait for the timer to expire and then click on download again. That is the complete owners manual.

 

 

http://www.4shared.com/document/GC1Qd5be/w41770e_owners_manual_20111.html

 

 

Customer: replied 5 years ago.

Ok, Thank you for your research and answer.

 

However, the manual / link that you provide is for the W4-1770E.

 

The engine that I have is not the "E" model. Mine is a W4-1770

 

My model has standard carburation and no emissions equipment or sensors.

 

Do you know if the firing order is still the same for my engine?

 

What is the correct order to attach the plug wires to the rotor cap. Some of my research indicates that is does not correlate to the firing order due to the speed at which the distributor rotates.

 

Thanks!

Expert:  J.R. replied 5 years ago.

See this link and do the same as you did with the last one. This is for the VH4D. Your engine is the later version of that engine and many of the parts are the same. The firing order and spark plug wire locations should be the same as yours.

 

http://www.4shared.com/document/btjt7Olc/VH4D_Repair1.html

J.R. and 3 other Small Engine Specialists are ready to help you