How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask James W Your Own Question
James W
James W, Small Engine Troubleshooting Expert
Category: Small Engine
Satisfied Customers: 3708
Experience:  7 years as Mechanic & Parts Manager for Brother who has Owned Lawn & Garden Repair shop for 35 years
18589515
Type Your Small Engine Question Here...
James W is online now
A new question is answered every 9 seconds

I need to replace the drive belt on my Cub Cadet riding Lawn

This answer was rated:

I need to replace the drive belt on my Cub Cadet riding Lawn mower, LTX 1050. Do you have in structions and a diagram for me to follow? Thank you.

James W :

Greetings, My name isXXXXX and I am here to help the best I can. My goal is 100% satisfaction. Let's get started.

James W :

I have a complete service manual which will tell you how to change the belt

James W :

and make needed adjustments

James W :

also shows how to perform most other repairs.. It is quite complete.

James W :


Here is a complete Service manual that you can download. It has full instructions telling you step by step exactly what you are trying to do to your 1000 - 1500 Series Cub Cadet Tractor with full color photos.


http://manuals.mtdproducts.com/mtd/DocGetter?doc=769-02100.pdf


 




James W :

There are two types of tractors covered and two sets or instructions

James W :

one is for the hydrostatic drive which starts on page 52.

James W :

The other is for the variable drive (slip belt) system

James W :

I am sorry, the hydro starts on page 36

James W :

the other on page 24

James W :

These are full color instructions, and should require no explanation

James W :

I suggest reading them first completely before you try.

James W :

I believe it is Much easier if done with a Buddy. I strongly suggest it is a two person job.

James W and 2 other Small Engine Specialists are ready to help you