How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy R. Your Own Question
Jeremy R.
Jeremy R., Technician
Category: Small Engine
Satisfied Customers: 9019
Experience:  15+ years of experience and a business owner.
8380480
Type Your Small Engine Question Here...
Jeremy R. is online now
A new question is answered every 9 seconds

changing pipes from Cobra to Vance & Hines on Yamaha VStar

Resolved Question:

changing pipes from Cobra to Vance & Hines on Yamaha VStar 650. do i need a jet kit for this? also been told it needs to be calibrated, does it?
Submitted: 5 years ago.
Category: Small Engine
Expert:  Jeremy R. replied 5 years ago.
Hi, and thank you for letting me try and assist you with your problem.
Just changing pipes you don't need a jet kit.
If you were going with a new K&N filter and pipes then I would suggest a stage 1 kit.
But just pipes, there's no need.
You probably should have a technician check the spark plugs though to make sure it's doing good.
Jeremy R. and other Small Engine Specialists are ready to help you