How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 12172
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a multiquip acx170s welder generator. The ac voltage

Customer Question

I have a multiquip acx170s welder generator. The ac voltage is very inconsistant. Sometimes when I start it the voltage will read 70v and in 5 minutes it will go to 120 and bounce around 100v to 125v. Othertimes it won't go over 70v for quite awhile.
Submitted: 5 years ago.
Category: Small Engine
Expert:  Hank F. replied 5 years ago.

Thank you for choosing Just Answer for the solution to your problem.
My name is XXXXX XXXXX I am going to assist you with this.


Could I please get the serial number of your welder/generator?


Customer: replied 5 years ago.
Expert:  Hank F. replied 5 years ago.

I'm sorry, but this is one set I am not at all familiar with.

I am going to need to opt out of this question to allow another expert to help you.


Related Small Engine Questions