How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jon K. Your Own Question
Jon K.
Jon K., Small Engine Diagnostic Expert
Category: Small Engine
Satisfied Customers: 5818
Experience:  Gold certified Stihl tech, Service Manager for a rental/repair shop.Certified in most small engines
29067132
Type Your Small Engine Question Here...
Jon K. is online now
A new question is answered every 9 seconds

Chain saw starts easily but loses power or rpms when I push

Resolved Question:

Chain saw starts easily but loses power or rpms when I push acelerate . Has gas , air filter looks clean as well as gas filter. Saw is four years old but only used two hours or less eash year and stored properly. , . got any ideas?
Submitted: 6 years ago.
Category: Small Engine
Expert:  Jon K. replied 6 years ago.
What model saw is this? There are a few things that could be wrong. One if equipped your muffler screen could be plugged up. two you could have a fouled fuel filter not allowing enough fuel to get to the carburetor. You could also have a pin hole or tear in the fuel line. Worst case scenario is that the carburetor is plugged and will need to be rebuilt.
Jon K. and 3 other Small Engine Specialists are ready to help you