How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick
Rick, Factory Authorized Trainer
Category: Small Engine
Satisfied Customers: 8057
Experience:  Outdoor Power Equipment technical trainer since 1990, covering eight states.
20444326
Type Your Small Engine Question Here...
Rick is online now
A new question is answered every 9 seconds

How do you replace the drive belt on a Husqvarna yth2448

Customer Question

How do you replace the drive belt on a Husqvarna yth2448
Submitted: 6 years ago.
Category: Small Engine
Expert:  Rick replied 6 years ago.
You're referring to the motion drive belt? If so, you must remove the electric clutch and lower the upper pulley down past the belt guards to get it into place. Let me know if this is what you're asking please. If so, do you have an impact wrench?