How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick
Rick, Factory Authorized Trainer
Category: Small Engine
Satisfied Customers: 8057
Experience:  Outdoor Power Equipment technical trainer since 1990, covering eight states.
20444326
Type Your Small Engine Question Here...
Rick is online now
A new question is answered every 9 seconds

How do you drain/change the oil in a Troy-Bilt mulching mower

Resolved Question:

How do you drain/change the oil in a Troy-Bilt mulching mower model 11A-436A711?

Greg
Boone, NC
Submitted: 6 years ago.
Category: Small Engine
Expert:  Rick replied 6 years ago.

On most of these engines, you just tip them on their side (air cleaner up) and drain the oil out the fill tube. You may also have a bottom drain or a side drain, but these aren't on too many mowers. Here's some info to illustrate the three methods. Hope this helps!

 

graphic

Rick and other Small Engine Specialists are ready to help you