How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask J.R. Your Own Question
J.R.
J.R., Small Engine Technician
Category: Small Engine
Satisfied Customers: 7445
Experience:  Owner of outdoor power equipment business, repairing all makes and models.
13636126
Type Your Small Engine Question Here...
J.R. is online now
A new question is answered every 9 seconds

INTEK 190 BRIGGS & STRATTON ENGINE ON A PRESSURE WASHER, GAS

Resolved Question:

INTEK 190 BRIGGS & STRATTON ENGINE ON A PRESSURE WASHER, GAS IS COMING OUT TWO SMALL HOLES TOWARD THE AIR FILTER
Submitted: 7 years ago.
Category: Small Engine
Expert:  J.R. replied 7 years ago.
The problem is a stuck needle valve in the carb. The carb is going to need to be taken apart and cleaned. Take the bowl off and then spray some carb cleaner up inside it while you move the float up and down.
Customer: replied 7 years ago.
IS THAT THE BOLT ON THE BOTTOM BOWL AND HOW DO YOU MOVE THE FLOAT
Expert:  J.R. replied 7 years ago.
Yes, that is the bolt. The float has a pin that slides in and holds it on.
Customer: replied 7 years ago.
OK NOW HOW DO I MOVE THE FLOAT?
Customer: replied 7 years ago.
OK NOW HOW DO I  MOVE THE FLOAT?
Expert:  J.R. replied 7 years ago.

The float just moves up and down on the pin.

 

 

 

 

 

J.R. and other Small Engine Specialists are ready to help you