How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick
Rick, Factory Authorized Trainer
Category: Small Engine
Satisfied Customers: 8057
Experience:  Outdoor Power Equipment technical trainer since 1990, covering eight states.
20444326
Type Your Small Engine Question Here...
Rick is online now
A new question is answered every 9 seconds

Service parts diagrams for Montgomery Ward Signature 2000 Elite

This answer was rated:

Service parts diagrams for Montgomery Ward Signature 2000 Elite Model TMO-(NNN) NNN-NNNN
There should be a serial number after the model number on the data plate. Can you supply it, please?
Customer: replied 6 years ago.
Manufacture's Code 1D303H30125

Hello,

 

This one took a bit of digging in the archive. This mower was built on April 30, 1993, and was the same as the 133P670G000 with the following exceptions:

 

Color - Silver Flake (629), Metallic Red (650)

Front Wheel Assy. -(NNN) NNN-NNNN/p>

Front Wheel Grease Fitting -(NNN) NNN-NNNN/p>

Rear Wheel Assy. -(NNN) NNN-NNNN/p>

Seat Assy -(NNN) NNN-NNNN/p>

Steering Wheel -(NNN) NNN-NNNN

Foot Pads -(NNN) NNN-NNNN(NNN) NNN-NNNN/p>

Mulching Kit Included - 190-097-000

 

All other parts will be correct in the parts list below:

 

Parts List 130P670G000

 

Hope this helps!

 

Customer: replied 6 years ago.
Does your information say how to maintain the transaxle ?Oil it etc.
The transaxle is serviced only by removing it from the vehicle and opening the case. When this is done - usually only when there's been an internal failure - it's lubricated with 15 oz. Shell Grease (MTD part#(NNN) NNN-NNNN sold in 8 oz. tubes) making sure each part is liberally coated on all sides during assembly since the grease will NOT migrate. Otherwise it's considered lubricated for the life of the unit with no user maintenance required.
Rick and other Small Engine Specialists are ready to help you
Customer: replied 6 years ago.
Thank You for your time and effort. The information was probably hard to find for a Wards Machine.
Glad to help. Thankfully (or unfortunately ;-)) I've been doing this for a long time so I have access to lots of info. Thank you for the accept, and be blessed!