How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 13023
Experience:  have worked on and around most engine models for 35 yrs./Polaris ATV expert
30244710
Type Your Small Engine Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How do I adjust the throttle lever on a MTD Yardman Model

Customer Question

How do I adjust the throttle lever on a MTD Yardman Model 662A>
Submitted: 7 years ago.
Category: Small Engine
Expert:  J.R. replied 7 years ago.
The inner cable should just have a z bend that connect to the throttle linkage plate. What are the model numbers off of the engine?
Customer: replied 7 years ago.
The carby end is not a problem. It is the control lever end. I can't determine whether the inner wire should go over the screw that secures the lever to the handle or not. The engine is a Briggs & Stratton the model is MTD 662A.
Expert:  J.R. replied 7 years ago.

Can you take a picture of the setup?

Customer: replied 7 years ago.
graphicImages sent
Expert:  J.R. replied 7 years ago.
The picture did not show up. Make sure it is in JPEG format and is smaller than 1 mb