How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask J.R. Your Own Question
J.R.
J.R., Small Engine Technician
Category: Small Engine
Satisfied Customers: 7445
Experience:  Owner of outdoor power equipment business, repairing all makes and models.
13636126
Type Your Small Engine Question Here...
J.R. is online now
A new question is answered every 9 seconds

I just rebuild a Briggs & Stratton Model 190402 carburetor

Customer Question

I just rebuild a Briggs & Stratton Model 190402 carburetor and I am trying to find out how to set the two needle valves.
Submitted: 7 years ago.
Category: Small Engine
Expert:  J.R. replied 7 years ago.
The adjustment screws should both be set a 1 1/2 turns open from lightly seated. You will then turn the idle mixture screw in until it starts to stall and then back it out until the engine misses. You will want it between those two places for the best idle. You will then want to put the rpm to high and the adjust the high speed needle the same way.