How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask James W Your Own Question
James W
James W, Small Engine Troubleshooting Expert
Category: Small Engine
Satisfied Customers: 3708
Experience:  7 years as Mechanic & Parts Manager for Brother who has Owned Lawn & Garden Repair shop for 35 years
18589515
Type Your Small Engine Question Here...
James W is online now
A new question is answered every 9 seconds

I have a old McCulloch Timber Bear chainsaw (mod #60013414,

Customer Question

I have a old McCulloch Timber Bear chainsaw (mod #60013414, ser #11-103491)that I am going thru, largely because I like it, (and I am cheap). The piston is fine, but it at least needs rings, and I would replace the upper block if that is reasonable Starting to wear thru the chrome (Nicasil?). Is it possible to buy rings and how about the block?
Submitted: 7 years ago.
Category: Small Engine
Expert:  James W replied 7 years ago.

see if this link works better

 

http://www.ordertree.com/ARI.aspx?Mfg=139&Model=13-600041-34 TIMBER BEAR 07/90 to Current IPL 211627

 



Edited by James W on 10/18/2009 at 12:06 PM EST