How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask J.R. Your Own Question
J.R.
J.R., Small Engine Technician
Category: Small Engine
Satisfied Customers: 7445
Experience:  Owner of outdoor power equipment business, repairing all makes and models.
13636126
Type Your Small Engine Question Here...
J.R. is online now
A new question is answered every 9 seconds

How do I set the valve lash on my honda gx 620

Resolved Question:

How do I set the valve lash on my honda gx 620
Submitted: 7 years ago.
Category: Small Engine
Expert:  J.R. replied 7 years ago.
To set the valves you will need to remove the valve coversand spark plugs. You will then want to bring the cylinder that you are working on to TDC on the compression stroke. Both rockers loose. You will then adjust the clearances with the adjustment screw. The spec is .006" on the intake and .008" on the exhaust.
J.R. and other Small Engine Specialists are ready to help you