How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob B. Your Own Question
Bob B.
Bob B., Tech Ed Teacher
Category: Small Engine
Satisfied Customers: 136
Experience:  Taught Small engine repair since 1988
Type Your Small Engine Question Here...
Bob B. is online now
A new question is answered every 9 seconds

Have a Troy Bilt pressure washer--model 01903 with honda GC

This answer was rated:

Have a Troy Bilt pressure washer--model 01903 with honda GC 160 5.0 engine and PSI of 2450. Need O rings for it but can't find. Any info on the O ring parts number I should ask for?
Which o ring?
Customer: replied 7 years ago.
We need the O rings in the water pump--in the area of the pistons. Is there a O ring kit for this?

There are but, theyre going to try to sell you on a pump.

Take the o rings to a home center and matchthem there as closely as possible.

If this helped please hit accept,if not, how else can I help?


Bob B. and 3 other Small Engine Specialists are ready to help you
Customer: replied 7 years ago.
We've done that but it continues to leak.
The part kit you are looking for is on this page on the bottom.
It can also be purchased there.

Please don't hit accept again or you will pay me 2x.

Related Small Engine Questions