How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Huber Your Own Question
Chris Huber
Chris Huber, Small Engine Technician
Category: Small Engine
Satisfied Customers: 625
Experience:  20 years experience. Briggs and Stratton Master Service Technician. Dealer for most engine lines.
Type Your Small Engine Question Here...
Chris Huber is online now
A new question is answered every 9 seconds

I have a Toro S140 Snow Thrower Model 38100. The chain keeps

This answer was rated:

I have a Toro S140 Snow Thrower Model 38100. The chain keeps slipping off and we cannot figure out how to tighten it. Any help would be appreciated.
Hi Bosky, Loosen the impeller bearing flanges on the outside of the impeller housing. With the chain installed lower the impeller away from the engine until the chain is tight and tighten the bolts.
Chris Huber and 2 other Small Engine Specialists are ready to help you